Developed by and exclusive to The SL Shop is the Bulkhead Panel Repair Kit.
Supplied as four individual components, the pre-made kit saves hours of fabrication time and can be fitted in situ.
A well documented Achilles heel of the Mercedes-Benz SL 107, rust in the bulkhead can cause water ingress in the cabin as well as electrical problems. Poor fitting of the Heater Blower Motor Cover, or failure of the seal, will result in water getting down into the plenum chamber, which over time will rust through the bulkhead.
For many years, rust in this area would deem a car beyond economical repair, which is why we developed this panel. See our photos to see just how much damage water in the plenum chamber can cause... and get yours sorted before it gets any worse.
Our kit is designed to remedy this common issue by improving on the original design. The buttresses are also designed with channels that feed the water to the drainage points to prevent build up and corrosion.
At The SL Shop we've done plenty of bulkhead repairs, so if you would prefer to leave it with the experts, contact our team to have the work done on your car.
- Exclusive to The SL Shop
- Kit contains: 1x Main Panel, 2x Buttresses and 1x front air vent panel
- Suitable for Mercedes-Benz SL 107 models from 1971 - '89
- Perfect for restoring or repairing your SL
This kit will require specialist fitting to ensure longevity and compatibility of this unit.
|Mercedes Benz No.||1076202308, 1076202508|
|Car Type||SL 107|
|Body Type||SL, SLC|